D-Link DIR-820L, Руководство пользователя, Страница: 93 / 165

88 D-Link DIR-820L User Manual
IPv6 Firewall
The DIR-820L’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
This feature functions in a similar way to the IP Filters feature.
Enable IPv6 Ingress
Filtering:
Enable IPv6 Simple
Security:
Configure IPv6 firewall
below:
Name:
Schedule:
Source:
Dest:
IP Address Range:
Protocol:
Port Range:
TBD
Check the box to enable the IPv6 firewall simple security.
Select one of the following options:
Turn IPv6 firewall off
Turn IPv6 Firewall ON and ALLOW Rules listed
Turn IPv6 Firewall ON and DENY Rules listed
Enter a name to identify the IPv6 firewall rule.
The schedule for when the IPv6 Firewall Rules will be enabled may be
set to Always or Never . Or you can create your own schedule in the
Tools > Schedules section.
Use the
Interface
drop-down menu to specify the interface that
connects to the source IPv6 addresses of the firewall rule.
Use the
Interface
drop-down menu to specify the interface that
connects to the destination IP address of the firewall rule.
Enter the Source IPv6 address range in the adjacent IP Address Range
field, and enter the Dest IPv6 address range in the other IP Address
Range field below.
Select the protocol of the firewall port (
Any
,
TCP
,
UDP
, or
ICMP
).
Enter the first port of the range that will be used for the firewall rule
in the first box and enter the last port in the range in the second box.