DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
USB Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the relevant
notification will be displayed in the top right corner of the page.
Figure 128. The notification on the PIN code check.
Click the
ENTER
button. When the
USB Modem / PIN
page opens, enter the PIN code in the
Authorization
section.
14
Click the
Show
icon (
)
to display the entered code. Then click the
APPLY
button.
Figure 129. Entering the PIN code.
Some USB modems in the router mode and Android smartphones in the modem mode have an IP
address from the subnet which coincides with the router's local subnet. In this case, the router's
web-based interface can be unavailable. For correct operation, disconnect the device from the USB
port and reboot the router. Then access the web-based interface, go to the
Connections Setup /
LAN
page, and change the value of the
IP address
field on the
IPv4
tab (for example, specify the
value
192.168.2.1
). Wait until the router is rebooted.
14 For some models of USB modems it is required to disable the PIN code check on the SIM card prior to connecting
the USB modem to the router.
Page
161
of 236
