DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
When the
WPA
,
WPA2
, or
WPA/WPA2 mixed
value is selected, the following settings are
displayed on the page:
Figure 102. The
WPA2
value is selected from the
Network authentication
drop-down list.
Parameter
Description
WPA2 Pre-
authentication
Move the switch to the right to activate preliminary authentication
(displayed only for the
WPA2
and
WPA/WPA2 mixed
authentication types).
IP address RADIUS
server
The IP address of the RADIUS server.
RADIUS server port
A port of the RADIUS server
.
RADIUS encryption key
The password which the router uses for communication with the
RADIUS server (the value of this parameter is specified in the
RADIUS server settings).
Encryption type
An encryption method:
TKIP
,
AES
, or
TKIP+AES
.
Group key update
interval
The time period (in seconds), at the end of which a new key for
WPA encryption is generated. When the value
0
is specified for this
field, the key is not renewed.
When you have configured the parameters, click the
APPLY
button.
To edit the basic or additional wireless network, left-click the relevant line in the table. On the
opened page, change the needed parameters and click the
APPLY
button.
To remove the additional network, select the checkbox located to the left of the relevant line in the
table and click the
DELETE
button (
). Then click the
APPLY
button.
Page
125
of 236
