DGS-6604
m
show ip dvmrp neighbor
CLI Reference Guide
637
This example shows how to display neighbor detail information.
Display Field
Descriptions
Description of the significant display fields.
ExpTime
The
neighbor time-out interval,
which SHOULD be set to 35 seconds.
This setting allows early detection of a lost neighbor yet provides
tolerance for busy multicast routers.
These time-out values MUST be coordinated between all DVMRP routers
of a particular physical network segment.
The expire time shown here is the amount of time remaining before
reaching the
neighbor time-out interval
setting.
Switch>show ip dvmrp neighbor detail
Capability Flags: N-Network, S-SNMP,M-MTRACE, G-GENID, P-PRUNE, L-LEAF
Neighbor address: 10.10.10.11
Interface: vlan1
UpTime: 0DT0H23M49S
ExpTime: 0DT0H0M30S
Generation ID: 0035ef6d
Major Version: 3
Minor Version: 255
Capabilities: e (Flags: M,G,P)
Number of bad routes Received: 0
Number of routes Received: 0
Number of PROBE Received: 144
Number of REPORT Received: 1
Number of PRUNE Received: 0
Number of GRAFT Received: 0
Number of GRAFTACK Recvd: 0
Display Field
Description
Capability Flags
LEAF - Whether this neighbor router is a leaf router.
PRUNE - This neighbor router understands pruning.
GENID- This neighbor router sends Generation Id's.
MTRACE - This neighbor router handles Mtrace requests.
SNMP - This neighbor router supports the DVMRP MIB.
Network - This neighbor will accept a network mask.