DGS-6604
m
match ipv6 address
CLI Reference Guide
426
match ipv6 address
Use this command to define a clause to match the route based on IPv6 access
list.
match ipv6 address
IPv6-ACCESS-LIST-NAME
no match ipv6 address [
IPv6-ACCESS-LIST-NAME
]
Default
Not configured
Command Mode
Route-map configuration
Usage Guideline
Use the
match ipv6 address
command in route map configure mode to define
rule for matching routes against IP standard access list.
Example
The following example create an IP access list "aclv6cfg" first and create a route
map entry to match against the create IP access list.
You can verify your settings by entering the
show route map
command.
Syntax Description
IPv6-ACCESS-LIST-
NAME
Specify an IPv6 access list name.
Switch(config)# ipv6 access-list extended aclv6cfg
Switch(config-ip-acl) # permit 2000::3:4 ffff::0 any
Switch(config-ip-acl)# exit
Switch(config)# route-map myPolicy permit 1
Switch(config-route-map)# match ipv6 address aclv6cfg
