D-Link DGS-510, Справочное руководство

Страница: 91 / 739

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
88
aaa accounting exec {default | LIST-NAME} start-stop METHOD1 [METHOD2...]
no aaa accounting exec {default | LIST-NAME}
Parameters
default Specifies to configure the default method list for EXEC accounting.
LIST-NAME Specifies the name of the method list. This name can be up to 32
characters long.
METHOD1 [METHOD2...] Specifies the list of methods that the accounting algorithm tries in
the given sequence. Enter at least one method or enter up to four
methods. The following are keywords that can be used to specify a
method.
group radius – Specifies to use the servers defined by the RADIUS
server host command.
group - Specifies to use the servers defined by the
server host command.
group GROUP-NAME – Specifies to use the server groups defined
by the AAA group server command.
none – Specifies not to perform accounting.
Default
No AAA accounting method is configured.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to configure the method list for EXEC accounting.
Example
This example shows how to create a method list for accounting of user activities using RADIUS, which
will send accounting messages at the start and end time of access.
Switch#configure terminal
Switch(config)#aaa accounting exec list-1 start-stop group radius
Switch(config)#
8-3 aaa accounting network
This command is used to account user activity in accessing the network. Use the no form of this
command to remove the accounting method list.
aaa accounting network default start-stop METHOD1 [METHOD2...]
no aaa accounting network default
Parameters
network Specifies to perform accounting of network related service requests.
start-stop
Specifies to send accounting messages at both the start time and
the end time of access. Users are allowed of access the network
regardless of whether the start accounting message enables the