D-Link DGS-510 Скачать руководство пользователя страница 450

Страница: 450 / 739

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide

447

Display Parameters

Interface

The authentication host received interface.

MAC Address

The MAC address of authentication host.

Authentication VLAN

The original VLAN of the host start authentication.

Authentication State

The authentication status of host.

Start:

Host received, but no any authentication start.

Initialization:

Authentication resource ready, but no new

authentication start.

Authenticating:

Host is under authenticating.

Failure:

Authentication failure.

Success:

Host pass authentication.

Accounting Session ID

The accounting session ID that used to do accounting after
authenticated.

Authentication Username

It indicates the user name of host. It's not available while the host is
selected by MAC-Auth.

Client IP Address

It indicates the address of the client associates. It's only available
while the host is selected by Web-Auth or JWAC.

Assigned VID

Effectively assigned VLAN ID that was authorized after the host
passed authentication.

Assigned Priority

Effectively assigned priority that was authorized after the host
passed authentication.

Assigned Ingress Bandwidth

Effectively assigned ingress that was authorized after the host
passed authentication.

Assigned Egress Bandwidth

Effectively assigned egress that was authorized after the host
passed authentication.

Method

The Authentication method, such as 802.1X, MAC-Auth, Web-Auth,
JWAC, and so on.

State

The method authentication state.

Authenticating:

Host is under authentication by this method.

Success:

Host pass this method authentication.

Selected:

This method’s authentication result is taken and parsed

by system for the host.

Failure:

Host fail at this method authentication.

Information:

Authentication info is unavailable.

Aging Time/Block Time

Aging

Time:

Specifies a time period during which an authenticated

host will be kept in an authenticated state. When the aging time has
timed-out, the host will be moved back to an unauthenticated state.

Blocked

Time:

If a host fails to pass the authentication, the next

authentication will not start within the block time unless the user
clears the entry state manually.

Idle Time

Idle

Time:

Indicates the leftover time of an authenticated session

that will be terminated if the session sustains no activity for the
configured period of time. It is only available for WEB sessions.

802.1X Authenticator State

Indicates the 802.1X authenticator PAE state: It can be one of the
following values:

INITIALIZE:

Indicates the authenticator is initializing the state

machine and ready to authenticate the supplicant.

DISCONNECTED:

Indicates that the state machine initialization has

finished, but no supplicant connects to this port.

CONNECTING:

Indicates that the Switch has detected a supplicant

connecting to this port. The PAE will attempt to establish
communication with a supplicant.

Содержание DGS-510




































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DGS-510

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-510, Справочное руководство

Результаты поиска

Содержание DGS-510

Отзывы:

Бренды по названию

Популярные бренды