DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
68
Virtual Stacking (SIM)
D-Link Single IP Management (SIM) is a concept that will stack switches together over Ethernet instead of
using stacking ports or modules. There are some advantages in implementing the Single IP Management
feature:
1. SIM can simplify management of small workgroups or wiring closets while scaling the network to
handle increased bandwidth demand.
2. SIM can reduce the number of IP address needed in your network.
3. SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers
that typically limit your topology options when using other stacking technology.
Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules:
•
SIM is an optional feature on the Switch and can easily be enabled or disabled through the
Command Line Interface or Web Interface. SIM grouping has no effect on the normal operation of the
Switch in the user’s network.
•
There are three classifications for switches using SIM. The
Commander Switch (CS)
, which is the
master switch of the group,
Member Switch (MS)
, which is a switch that is recognized by the CS a
member of a SIM group, and a
Candidate Switch (CaS)
, which is a Switch that has a physical link to
the SIM group but has not been recognized by the CS as a member of the SIM group.
•
A SIM group can only have one Commander Switch (CS).
•
A SIM group accepts up to 32 switches (numbered 1-32), not including the Commander Switch
(numbered 0).
•
Members of a SIM group cannot cross a router.
•
There is no limit to the number of SIM groups in the same IP subnet (broadcast domain); however a
single switch can only belong to one group.
•
If multiple VLANs are configured, the SIM group will only utilize the management VLAN on any
switch.
•
SIM allows intermediate devices that do not support SIM. This enables the user to manage switches
that are more than one hop away from the CS.
The SIM group is a group of switches that are managed as a single entity. The Switch may take on three
different roles:
1.
Commander Switch (CS)
– This is a switch that has been manually configured as the controlling
device for a group, and takes on the following characteristics:
a. It has an IP Address.
b. It is not a command switch or member switch of another Single IP group.
c. It is connected to the member switches through its management VLAN.
2.
Member Switch (MS)
– This is a switch that has joined a single IP group and is accessible from the
CS, and it takes on the following characteristics:
a. It is not a CS or MS of another IP group.
b. It is connected to the CS through the CS management VLAN.
3.
Candidate Switch (CaS)
– This is a switch that is ready to join a SIM group but is not yet a member
of the SIM group. The Candidate Switch may join the SIM group of the Switch by manually
configuring it to be a MS of a SIM group. A switch configured as a CaS is not a member of a SIM
group and will take on the following characteristics:
a. It is not a CS or MS of another Single IP group.
b. It is connected to the CS through the CS management VLAN
The following rules also apply to the above roles:
•
Each device begins in a Candidate state.
•
A CS must change its role to CaS and then to MS, to become a MS of a SIM group. Thus, the CS
cannot directly be converted to a MS.
Содержание DGS-1510 Series
Страница 1: ...1...
