DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
144
The fields that can be configured are described below:
Parameter
Description
IP Address
Select and enter the single IPv4 address here.
Network Address
Select and enter the IPv4 network address here. In the first space
enter the network prefix and in the second space enter the network
mask.
Connected
Select this option to display only connected routes.
Hardware
Select this option to display only hardware routes. Hardware routes are
routes that have been written into the hardware chip.
Summary
Display the brief information of the active routing entries.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IPv6 Interface
This window is used to view and configure the IPv6 interface’s settings.
To view the following window, click
L3 Features > IPv6 Interface
, as shown below:
Figure 6-11 IPv6 Interface window
The fields that can be configured are described below:
Parameter
Description
Interface VLAN
Enter the VLAN interface’s ID that will be associated with the IPv6
entry.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Detail
button to view and configure more detailed settings for the IPv6 interface entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Detail
button, the following page will be available.
Содержание DGS-1510 Series
Страница 1: ...1...
