DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
305
Static ACL
Select whether to use a static ACL or not here by either selecting
Yes
or
No
.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete
button to remove an entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
ARP Inspection Port Settings
This window is used to view and configure the ARP inspection port settings.
To view the following window, click
Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP
Inspection Port Settings
, as shown below:
Figure 9-44 ARP Inspection Port Settings window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Rate Limit
Enter the rate limit value here. This value must be between 1 and 150
packets per seconds.
Burst Interval
Enter the burst interval value here. This value must be between 1 and
Содержание DGS-1510 Series
Страница 1: ...1...
