DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
334
The fields that can be configured for
Network Access Authentication MAC Format Settings
are
described below:
Parameter
Description
Case
Select the case format that will be used for the network access
authentication MAC address here. Options to choose from are
Lowercase
and
Uppercase
.
Delimiter
Select the delimiter that will be used for the network access
authentication MAC address here. Options to choose from are
Hyphen
,
Colon
,
Dot
, and
None
.
Delimiter Number
Select the delimiter number option here. Options to choose from are
1
,
2
, and
5
.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
General Settings
are described below:
Parameter
Description
Max Users
Enter the maximum amount of users allowed here. This value must be
between 1 and 1000. By default, this option is 1000.
Deny MAC-Move
Select to enable or disable the deny MAC-move feature here. This
option controls whether to allow authenticated hosts to do roaming
across different switch ports and only controls whether a host which is
authenticated at a port set to the multi-authenticate mode is allowed to
move to another port.
If a station is allowed to move, there are two situations. It may either
need to be re-authenticated or directly moved to the new port without
re-authentication based on the following rule. If the new port has the
same authentication configuration as the original port, then re-
authentication is not needed. The host will inherit the same
authorization attributes with new port. The authenticated host can do
roaming from port 1 to port 2, and inherit the authorization attributes
without re-authentication. If the new port has the different
authentication configuration as the original port, then re-authentication
is needed. The authenticated host on port 1 can move and re-
authenticated by port 2. If the new port has no authentication method
enabled, then the station is directly moved to the new port. The
session with the original port is removed. The authenticated host on
port 1 can be moved to port 2.
If this feature is disabled and an authenticated host moves to another
port, then this is treated as a violation error.
Authorization State
Select to enable or disable the authorized state here. The option is
used to enable or disable the acceptance of an authorized
configuration. When authorization is enabled for authentication, the
authorized attributes (for example VLAN, 802.1p default priority,
bandwidth, and ACL) assigned by the RADIUS server will be accepted
if the authorization status is enabled. Bandwidth and ACL are assigned
on a per-port basis. If in the multi-authenticated mode, VLAN and
802.1p are assigned on a per-host basis. Otherwise, Bandwidth and
ACL are assigned on a per-port basis.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
User Information
are described below:
Parameter
Description
Содержание DGS-1510 Series
Страница 1: ...1...
