DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
58
The fields that can be configured are described below:
Parameter
Description
Interface VLAN
Enter the VLAN from 1 to 4094 for DHCPv6 relay.
Destination IPv6 Address
Enter the DHCPv6 relay destination address.
Output Interface VLAN
Enter the output interface for the relay destination.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Delete
button to remove the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
DHCP Auto Configuration
This window is used to configure the DHCP auto-configuration function.
To view the following window, click
Management > DHCP > DHCP Auto Configuration
, as shown below:
Figure 4-37 DHCP Auto Configuration window
The fields that can be configured are described below:
Parameter
Description
Auto Configuration State
Select this option to enable or disable the auto-configuration function.
Click the
Apply
button to accept the changes made.
DNS
Computer users usually prefer to use text names for computers for which they may want to open a
connection. Computers themselves, require 32 bit IP addresses. Somewhere, a database of network
devices’ text names and their corresponding IP addresses must be maintained.
The Domain Name System (DNS) is used to map names to IP addresses throughout the Internet and has
been adapted for use within intranets. For two DNS servers to communicate across different subnets, the
DNS Relay of the Switch must be used. The DNS servers are identified by IP addresses.
Mapping Domain Names to Addresses
Name-to-address translation is performed by a program called a Name server. The client program is
called a Name resolver. A Name resolver may need to contact several Name servers to translate a name
to an address.
Содержание DGS-1510 Series
Страница 1: ...1...
