4 Configuration
D-Link Smart Managed Switch User Manual
2
2
5
5
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no default name, and all ports as “Untagged”
Figure 4.28 – L2 Features > VLAN > 802.1Q VLAN
Click
Rename
to rename the VLAN group.
Click
Delete
to remove the VLAN group.
To create a new VID group, click
Add VID
and the following will be displayed:
Figure 4.29 – L2 Features > VLAN > 802.1Q VLAN – Add VID
The fields that can be configured for
802.1Q VLAN
are described below:
Item
Description
VID
Enter the VID to be created.
VLAN Name
Enter the VLAN name for the VID to be created.
Port
Assign ports as
Untag
,
Tag
or
Not Member
. Click
All
to select all
ports.
Table 4.15
Click
Apply
to create a new VID group.
To configure the PVID settings, click
PVID Settings
and the following will be displayed:
Figure 4.30 – L2 Features > VLAN > 802.1Q VLAN – PVID Settings
Click
Apply
to make the configurations take effect.
Click
Cancel
to discard any changed made and return to the previous page.
L2 Features > VLAN > Port-Based VLAN
Port-Based VLANs are the simplest and most common form of VLAN. It assigns physical LAN ports to
VLANs, effectively broadening their application. You can assign multiple ports to the same VLAN, or each
port to a separate VLAN. The default is
disabled
.
