4 Configuration
D-Link Smart Managed Switch User Manual
18
Figure 4.17 – System > PoE > PoE System
The fields that can be configured for
PoE System
are described below:
Item
Description
PoE System
PoE Power Threshold
.
(Only for DGS-1100-
08P)
Manually configure the system power budget. The power
budget range is between
7.1
and
64
Watts.
Power shut Off
Sequence
Defines the method used to deny power to a port once the
threshold is reached. The possible fields are:
Deny next port:
When the power budget is exceeded, the
next port attempting to power up is denied, regardless of
the port priority.
Deny low priority port:
The port with the lower priority will
be shut down to allow the higher priority port to power up.
System Power Status
Total PoE Power
Budget
Displays the total PoE power budget of this switch.
Power Used
Displays the current used power of the switch.
Power Left
Displays the spare power of the switch.
The percentage of
system supplied
Displays the percentage of system power supplied of the
switch.
Table 4.4
Click
Apply
to make the configurations take effect.
System > PoE > PoE Configuration (DGS-1100-05PD/08P only)
The DGS-1100-05PD/08P support Power over Ethernet (PoE) as defined by the IEEE specification. The PoE
port specification is listed in the table below:
Model Name
PoE Capable Ports
Power Budget
DGS-1100-05PD
Port 1 ~ Port 2: Max. PoE Output 15.4 Watts
18 Watts
DGS-1100-08P
Port 1 ~ Port 8: Max. PoE Output 30 Watts
64 Watts
The DGS-1100-05PD/08P work with D-Link 802.3af or 802.3at capable devices.
IEEE 802.3at defined that the PSE provides power according to the following classification:
Class Usage
Output power limit by PSE
