4 Configuration
D-Link Smart Managed Switch User Manual
2
2
3
3
Figure 4.24 – L2 Features > FDB > Static FDB > Unicast Static FDB
The fields that can be configured for
Unicast Static FDB
are described below:
Item
Description
Port
Allows the selection of the port number on which the MAC address
entered resides.
VID
Enter
the VLAN ID of the VLAN which the corresponding MAC
address belongs to.
MAC Address
Enter
the MAC address to which packets will be statically forwarded
or dropped. This must be a unicast MAC address.
Table 4.11
Click
Apply
to make the configurations take effect.
Click
Delete All
to delete all the entries found in the display table.
L2 Features > FDB > Static FDB > Multicast Static FDB
The Multicast Static FDB page allows user to view and configure the static multicast forwarding settings on
the Switch.
Figure 4.25 – L2 Features > FDB > Static FDB > Multicast Static FDB
The fields that can be configured for
Multicast Static FDB
are described below:
Item
Description
From Port / To Port
Enter
the appropriate port range used for the configuration.
VID
Enter
the VLAN ID of the VLAN the corresponding MAC address
belongs to.
MAC Address
Enter
the static destination MAC address of the multicast packets.
This must be a multicast MAC address. The format of the
destination MAC address is 01-XX-XX-XX-XX-XX.
Table 4.12
Click
Apply
to make the configurations take effect.
Click
Delete All
to delete all the entries found in the display table.
Click
Delete
to remove a specific entry.
L2 Features > FDB > MAC Address Table Settings
The
MAC Address Table Settings
page allows user to view and configure the MAC address table’s global
settings.