D-Link DES-3528 - xStack Switch - Stackable, Справочное руководство CLI

Страница: 380 / 605

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
380
config jwac user
Purpose Used to update local user DB.
Syntax config jwac user <username 15> {vlan <vlanid 1-4094>}
Description This command updates the local user DB. Only the created user can be configured.
Parameters
<username 15>
−
The user name to be created. The max length of the username is 15
characters.
<vlanid 1-4094>
−
Target VLAN ID for authenticated host which uses this user account to
pass authentication.
Restrictions Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure a JWAC user:
DES-3528:admin# config jwac user twatanabe vlan 3
Command: config jwac user twatanabe vlan 3
Enter a old password:**
Enter a case-sensitive new password:***
Enter the new password again for confirmation:***
Success.
DES-3528:admin#
delete jwac user
Purpose Used to delete JWAC users from the local DB.
Syntax delete jwac [user <username 15> | all_users]
Description This command deletes JWAC users from the local DB.
Parameters
user
−
To specify the user name to be deleted
all_users
−
All user accouts in local DB will be deleted.
Restrictions Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete a JWAC user:
DES-3528:admin# delete jwac user twatanabe
Command: delete jwac user twatanabe
Success.
DES-3528:admin#
show jwac user
Purpose Used to show JWAC users in the local DB.
Syntax show jwac user
Description This command displays JWAC users in the local DB.
Parameters None
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To show a JWAC user:
DES-3528:admin# show jwac user
Command: show jwac user