D-Link DES-3528 - xStack Switch - Stackable страница 28 Скачать руководство пользователя

Страница: 28 / 605

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide

Modify Banner and Prompt Commands

Administrator level users can modify the login banner (greeting message) and command prompt by using the
commands described below.

Command

Parameters

config command_prompt

[<string 16> | username | default]

config greeting_message

{default}

show greeting_message

The Modify Banner and Prompt commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.

config command prompt

Purpose

Used to configure the command prompt.

Syntax

config command_prompt [<string 16> | username | default]

Description

This command is used to change the command prompt.

Parameters

string 16

–The command prompt can be changed by entering a new name of no more that 16

characters.

username

– The command prompt will be changed to the login username.

default

– The command prompt will reset to factory default command prompt.

Restrictions

Only Administrator and Operator-level users can issue this command. Other restrictions
include:

•

If the “

reset

” command is executed, the modified command prompt will remain

modified. However, the “

reset config/reset system

” command will reset the

command prompt to the original factory banner.

Example usage:

To modify the command prompt to “AtYourService”:

DES-3528:admin#config command_prompt AtYourService
Command: config command_prompt AtYourService

Success.

AtYourService:admin#

Содержание DES-3528 - xStack Switch - Stackable






























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы:

Похожие инструкции для DES-3528 - xStack Switch - Stackable

Бренды по названию

Популярные бренды

D-Link DES-3528 - xStack Switch - Stackable, Справочное руководство CLI

Результаты поиска

Содержание DES-3528 - xStack Switch - Stackable

Отзывы:

Похожие инструкции для DES-3528 - xStack Switch - Stackable

Бренды по названию

Популярные бренды