manualshive.com logo in svg

D-Link DES-3528 - xStack Switch - Stackable, Справочное руководство CLI

"Switch D-Link DES-3528 из серии xStack - стековый коммутатор с возможностью каскадирования. Идеальное решение для бизнеса. Бесплатное руководство пользователя доступно для загрузки на нашем manualshive.com. Необходимый инструмент для оптимизации сетевой инфраструктуры."

Поделиться
Скачать
background image

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide 

216 

config mld_snooping querier 

Purpose 

This command is used to configure the MLD snooping querier. 

Syntax 

config mld_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all] 
{query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable 
<value 1-7> | last_listener_query_interval <sec 1-25> | state [enable | disable] | version 
<value 1-2>}(1) 

Description 

This command configures the timer in seconds between general query transmissions, the 
maximum time in seconds to wait for reports from listeners, and the permitted packet loss 
that is guaranteed by MLD snooping. 

Parameters 

vlan_name

 - Specify the name of the VLAN for which MLD snooping querier is to be 

configured. 

<

vlan_name 32

> - Enter the VLAN name here. The VLAN name can be up to 32 characters 

long. 

vlanid

 - Specify the ID of the VLAN for which MLD snooping querier is to be configured. 

<

vlanid_list

> - Enter the VLAN ID list here. 

all

 - Specify all VLANs for which MLD snooping querier is to be configured. 

query_interval - (Optional) Specify the amount of time in seconds between general query 
transmissions. The default setting is 125 seconds. 

<

sec 1-65535

> - Enter the query interval value here. This value must be between 1 and 

65535 seconds. 

max_reponse_time

 - (Optional) Specify the maximum time in seconds to wait for reports from 

listeners. The default setting is 10 seconds. 

<

sec 1-25>

 - Enter the maximum response time value here. This value must be between 1 

and 25 seconds. 

robustness_variable

 - (Optional) Provides fine-tuning to allow for expected packet loss on a 

subnet. The value of the robustness variable is used in calculating the following MLD 
message intervals: 

<

value 1-7

> - Enter the robustness variable value here. This value must be between 1 and 7. 

•

 

Group listener interval—Amount of time that must pass before a multicast router 
decides there are no more listeners of a group on a network. This interval is 
calculated as follows: (robustness variable * query interval) + (1 * query response 
interval). 

•

 

Other querier present interval—Amount of time that must pass before a multicast 
router decides that there is no longer another multicast router that is the querier. This 
interval is calculated as follows: (robustness variable * query interval) + (0.5 * query 
response interval). 

•

 

Last listener query count—Number of group-specific queries sent before the router 
assumes there are no local listeners of a group. The default number is the value of 
the robustness variable. 

•

 

By default, the robustness variable is set to 2. You might want to increase this value 
if you expect a subnet to be loosely. 

last_listener_query_interval

 - (Optional) Specify the maximum amount of time between 

group-specific query messages, including those sent in response to done-group messages. 
You might lower this interval to reduce the amount of time it takes a router to detect the loss 
of the last listener of a group. 

<

sec 1-25

> - Enter the last listener query interval value here. This value must be between 1 

and 25 seconds. 

state

 - (Optional) This allows the Switch to be specified as an MLD Querier (sends MLD 

query packets) or a Non-Querier (does not send MLD query packets). Set to enable or 
disable. 

enable

 - Enter enable to enable the MLD querier state here. 

disable

 - Enter disable to disable the MLD querier state here. 

version

 - (Optional) Specify the version of MLD packet that will be sent by this port. If a MLD 

packet received by the interface has a version higher than the specified version, this packet 
will be dropped. 

Содержание DES-3528 - xStack Switch - Stackable






























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3528 - xStack Switch - Stackable

Sun Microsystems Ray 3 Plus Client Getting Started Manual preview
Ray 3 Plus Client
Бренд: Sun Microsystems Страницы: 6
LAWO edge User Manual preview
edge
Бренд: LAWO Страницы: 154
Patton electronics 1090 Service Manual preview
1090
Бренд: Patton electronics Страницы: 8
Paradyne MCC Installation Instructions Manual preview
MCC
Бренд: Paradyne Страницы: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Бренд: Paradyne Страницы: 19
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Бренд: Paradyne Страницы: 32
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Бренд: Paradyne Страницы: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Бренд: Paradyne Страницы: 141
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Бренд: Paradyne Страницы: 28
Paradyne COMSPHERE 6800 Series Installation And Enabling/Disabling Instructions preview
COMSPHERE 6800 Series
Бренд: Paradyne Страницы: 7
Tripp Lite N48M Series Installation Manual preview
N48M Series
Бренд: Tripp Lite Страницы: 20
Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Бренд: Opengear Страницы: 2
IEI Technology PUZZLE-IN003B User Manual preview
PUZZLE-IN003B
Бренд: IEI Technology Страницы: 86
Dahua Technology Lite N42B1P Series Quick Start Manual preview
Lite N42B1P Series
Бренд: Dahua Technology Страницы: 14
TP-Link Archer MR500 User Manual preview
Archer MR500
Бренд: TP-Link Страницы: 110
Kanguru Data Bank User Manual preview
Data Bank
Бренд: Kanguru Страницы: 13
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Бренд: Supermicro Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды