D-Link DES-3350SR, Руководство пользователя

Страница: 100 / 188

D-Link DES-3350SR Standalone Layer 3 Switch
90
•
An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the
switch’s SNMP agent.
•
An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community.
•
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
Figure 8 - 16. SNMP Community Table Configuration window
To delete an existing entry, click the selection button in the Delete column on the far right that corresponds to the port you want to
configure. To create a new entry, configure the parameters as desired in the top part of the window above and click the
Apply
button. This will add the new string to the SNMP Community Table.
Configure the following for the new SNMP Community entry:
Parameter Description
Community Name Type an alphanumeric string of up to 32
characters that is used to identify members of
an SNMP community. This string is used
like a password to give remote SNMP
managers access to MIB objects in the
switch’s SNMP agent.
View Name Type an alphanumeric string of up to 32
characters that is used to identify the group of
MIB objects that a remote SNMP manager is
allowed to access on the switch. The view
name must exist in the SNMP View Table.
Access Right Use the pull-down menu to select the access
right:
Read_Only
−
Specifies that SNMP
community members using the community
string created with this command can only
read the contents of the MIBs on the switch.
Read_Write
−
Specifies that SNMP
community members using the community
string created with this command can read
from and write to the contents of the MIBs on
the switch.
SNMP Host Table
Use the SNMP Host Table to set up trap recipients.