background image

D-Link DES-3010FA/GA User Guide

Page 94 

Action 

— The action to be applied to packets arriving on a locked port. The possible field values are:

Forward

 — Forwards packets from an unknown source without learning the MAC address.

Discard

 — Discards packets from any unlearned source. This is the default value.

Shutdown

 — Discards packets from any unlearned source and shuts down the port. The port remains 

shut down until reactivated, or until the device is reset.

Trap

 — Enables traps when a packet is received on a locked port. The possible field values are:

Checked — Enables traps.

Unchecked — Disables traps.

Trap Frequency (Sec) 

— The amount of time (in seconds) between traps. The default value is 10 seconds.

2.

Click . 

The 

Port Security Settings Page

 opens:

Figure 48: Port Security Settings Page

3.

Modify the 

Interface

Lock Interface

Action on Violation

Enable Trap

Port Status

, and 

Trap Frequency 

fields.

4.

Click 

. The port security settings are defined, and the device is updated.

Содержание DES-3010FA


























































































































































































































































































Отзывы: