D-Link DES-3010FA, Руководство пользователя для веб

Страница: 113 / 281

D-Link DES-3010FA/GA User Guide
Page 112
–
PV - Promiscuous — Indicates the port is part of a PV Promiscuous VLAN.
–
PV - Isolated — Indicates the port is part of a PV Isolated VLAN.
–
PV - Community — Indicates the port is part of a PV Community VLAN.
•
Dynamic — Assigns a port to a VLAN based on the host source MAC address connected to the port.
•
PVID — Assigns a VLAN ID to untagged packets. The possible values are 1-4094. VLAN 4095 is defined as
per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped.
•
Frame Type — Specifies the packet type accepted on the port. The possible field values are:
–
Admit Tag Only — Only tagged packets are accepted on the port.
–
Admit All — Both tagged and untagged packets are accepted on the port.
•
Ingress Filtering — Indicates whether ingress filtering is enabled on the port. The possible field values are:
–
Enable — Enables ingress filtering on the device. Ingress filtering discards packets that are defined to
VLANs of which the specific port is not a member.
–
Disable — Disables ingress filtering on the device.
•
Reserve VLAN — Indicates the VLAN selected by the user to be the reserved VLAN if not in use by the sys-
tem.
2. Select a port.
3. Click . The VLAN Interface Settings Page opens:
Figure 63: VLAN Interface Settings Page
4. Define the Interface , Port VLAN Mode , Dynamic , PVID , Frame Type , Ingress Filtering , and Reserve VLAN for
Internal Use fields.
5. Click . The VLAN interface settings are modified, and the device is updated.