73
disable stp
Purpose
Used to disable STP on the Switch.
Syntax disable
stp
Description
This command allows the Spanning Tree
Protocol to be disabled on the Switch.
Parameters
None.
Example usage:
To disable STP on the Switch:
Figure 72. disable stp command
config stp
Purpose
Used to setup STP on the Switch.
Syntax [maxage
<value
6-40>
| hellotime <value 1-10>
| forwarddelay <value 4-30> | priority <value 1-
65535>]
Description
This command is used to setup the Spanning
Tree Protocol (STP) for the entire Switch.
Parameters maxage
<value
6-40>
-
The value may be set to
ensure that old information does not endlessly
circulate through redundant paths in the network,
preventing the effective propagation of the new
information. Set by the Root Bridge, this value
will
aid in determining that the Switch has
spanning tree configuration values consistent
with other
Parameters
devices on the bridged LAN. If the value ages out