47
D-Link DCS-6116 User Manual
Section 3 - Configuration
Filter
Then you can add a rule to the following Access List. Please note that the IPv6 access
list column will not be displayed unless you enable IPv6 on the Network page.
For more information about IPv6 Setting, please refer to Enable IPv6 for detailed
information.
There are three types of rules:
Single:
This rule allows the user to add an IP address to the Allowed/Denied list.
Network:
This rule allows the user to assign a network address and corresponding
subnet mask to the Allow/Deny List.
Range:
This rule allows the user to assign a range of IP addresses to the Allow/Deny
List (This rule is only applied to IPv4).
Administrator IP Address
Always allow the IP address to access this device: You can select this item and add
the Administrator’s IP address in this field to make sure the Administrator can always
connect to the device.
