25
D-Link DCS-3714 User Manual
Configuration
Network Setup
LAN Settings:
DHCP:
Static IP
Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP
Port Forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A
static IP address may simplify access to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
The primary domain name server translates names to IP addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as a
UPnP device on your network.
Enabling this setting allows the camera to add port forwarding
entries into the router automatically on a UPnP capable network.
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
