49
D-Link DCS-3714 User Manual
Configuration
ICR
You may configure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low
light environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
DC Power
Output:
The Day/Night mode is set automatically. Generally, the camera
uses Day mode and switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera will
enter Day mode at the starting time and return to Night mode at the
ending time.
The DC 12V Power Output port can supply 12V DC, 100mA of
power to another device (such as a spotlight or infrared lamp). Its
default setting is
Off
, meaning it will not supply power. You can
select
On
to turn on the power supply. If you choose
Sync With
ICR
, the power output will be enabled whenever the IR Cut Filter
is active. Alternatively, you can select
Schedule
and manually
specify when the power should be enabled.
DC Power Output
12V DC, 100mA
