47
D-Link DCS-3714 User Manual
Configuration
Advanced
This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical
interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors
and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.
Select D/I or D/O
Mode:
Video Output:
The camera will send a signal when an event is triggered, depending
upon the type of device connected to the DI circuit.
N.C. stands for
Normally Closed
. This means that the normal
state of the circuit is closed. Therefore events are triggered when
the device status changes to "Open."
N.O. stands for
Normally Open
. This means that the normal state
of the circuit is open. Therefore events are triggered when the
device status changes to "Closed."
Enable/ disable the BNC terminal TV output signal.
Digital Input/Output
D/I and D/O
Pin Block
