DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Installation and Connection
9. In the opened
Wireless Network Connection
window, select the wireless network
(for operating in the 2.4GHz band) or
(for
operating in the 5GHz band) and click the
Connect
button.
Figure 20. The list of available networks.
10. In the opened window, enter the network key (see the field
Password
on the back panel of
the device) in the
Security key
field and click the
Next
button.
11. Allow or forbid your PC to be discoverable by other devices on this network (
Yes / No
).
Figure 21. PC discovery settings.
12. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as a dot with curved lines indicating the signal level.
Now you can connect to the web-based interface of DAP-1620 for configuring all needed
parameters. To gain access to an external network (to the Internet), you also need to specify the
default gateway and the addresses of DNS servers.
!
If you perform initial configuration of the
extender
via Wi-Fi connection, note that
immediately after changing the wireless default settings of the
extender
you will need to
reconfigure the wireless connection using the newly specified settings.
4 See the field
Wi-Fi Name (SSID) 2.4GHz
on the back panel of the device.
5 See the field
Wi-Fi Name (SSID) 5GHz
on the back panel of the device.
Page
31
of 125
