DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
In the
Static IP Addresses
section, you can specify MAC address and IPv6 address pairs (set a
fixed IPv6 address in the local area network for a device with a certain MAC address). The extender
assigns IPv6 addresses in accordance with the specified pairs only when the
Stateful
value is
selected from the
Mode of dynamic IPv6 address assignment
drop-down list in the
Dynamic IPv6 Addresses
section.
Figure 52. Configuring the local interface. The
IPv6
tab. The section for creating MAC-IPv6 pairs.
To create a MAC-IPv6 pair, click the
ADD
button (
). In the opened window, fill in the
MAC
address
field. You can choose a device connected to the extender's LAN at the moment. To do
this, select the relevant MAC address from the drop-down list (the field will be filled in
automatically). Then in the
IP address
field, enter an IPv6 address which will be assigned to the
device with the specified MAC address. In the
Hostname
field, specify a network name of the
device for easier identification (
optional
). Click the
APPLY
button.
To create MAC-IPv6 pairs for the devices connected to the extender at the moment, click the
KNOWN CLIENTS
button. In the opened window, select the needed device and click the
OK
button. To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for an existing MAC-IPv6 pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IPv6 pair, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Then click the
APPLY
button. Also you can remove a pair in
the editing window.
Page
60
of 125
