DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Parameter
Description
Use multicast for
service data exchange
Move the switch to the right in order to use multicast traffic for
service data exchange between access points (routers, extenders).
This setting is needed if the devices which support the smart
adjustment function are located in different subnets. If the switch is
moved to the right, the
Multicast TTL
and
Multicast group
address
fields are displayed on the page.
If the switch is moved to the left, broadcast traffic is used for service
data exchange.
Multicast TTL
Specify the TTL (
Time to live
) parameter value. The recommended
value is
4
.
Multicast group
address
Specify the address of the multicast group (from the subnet
239.255.0.0/16).
2.4 GHz
/
5 GHz
Maximum time of
storing data
The maximum time period (in seconds) during which the extender
(access point) stores data on the signal strength of the client located
on its coverage area.
Minimum level of
connection quality
The signal strength upon which the extender (access point) starts
scanning other devices in order to find a device with a higher signal
level.
Dead zone
This parameter is used for calculation of the signal strength upon
which the smart adjustment function goes off. If the signal strength
provided by another device is less than the sum of the
Minimum
level of connection quality
field value and
the
Dead zone
field
value, then the client disconnects from the extender (access point).
You can specify the values from
-50%
to
+50%
.
Threshold value of
connection quality
The signal strength upon which the extender (access point)
disconnects the client from its wireless network regardless of the
signal levels of other devices. This value should not be greater than
the value specified in the field
Minimum level of connection
quality
.
After specifying the needed parameters, click the
APPLY
button.
To disable the function of smart adjustment of Wi-Fi clients, click the
DISABLE
button.
Page
92
of 125
