DAP-1620
AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Firmware Update
On the
System / Firmware Update
page, you can update the firmware of the extender and
configure the automatic check for updates of the extender's firmware.
!
Update the firmware only when the
extender
is connected to your PC via a wired
connection.
Figure 76. The
System / Firmware Update
page.
The current version of the extender's firmware is displayed in the
Current firmware version
field.
By default, the automatic check for the extender's firmware updates is enabled. If the
Static
value
is selected from the
Mode of local IP address assignment
list on the
Connections Setup /
LAN
page, the
Gateway IP address
field should also be filled in on order to realize automatic
check.
If a firmware update is available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the
Remote Update
section, move the
Check for updates automatically
switch to the left and click the
APPLY SETTINGS
button.
To enable the automatic check for firmware updates, in the
Remote Update
section, move the
Check for updates automatically
switch to the right. In the
Interval
field, specify the time
period (in seconds) between checks or leave the value specified by default (
43200
).
By default, in the
Remote server URL
field, the D-Link update server address
(
fwupdate.dlink.ru
) is specified. To add one more address, click the
ADD
button and enter
the address in the displayed line. To remove the address, click the
Delete
icon ( ) in the line of
the address.
Click the
APPLY SETTINGS
button.
You can update the firmware of the extender locally (from the hard drive of your PC) or remotely
(from the update server).
Page
103
of 125
