D-Link CP310 - DFL - Security Appliance Скачать руководство пользователя страница 337

Страница: 337 / 485

Adding and Editing VPN Sites

In this field…

Do this…

Route Based VPN

dynamic or static routing schemes.

This improves network and VPN management efficiency for large

works, it is recommended to use a route-based

VPN combined with OSPF dynamic routing. This enables you to make

fre

es to the network topology, such as adding an internal

network, without having to reconfigure static routes.

OSPF is enabled using CLI. For information on using CLI, see

Controlling

the Command Line

on page 386. For information on

ference

Guide

gatew

ick this option to create a virtual tunnel interface (VTI) for this site, so

at it can participate in a route-based VPN.

oute-based VPNs allow routing connections over VPN tunnels, so that

mote VPN sites can participate in

tworks.

For constantly changing net

quent chang

e Appliance via

e r levant commands for OSPF, refer to the

NetDefend CLI Re

is option is only available for when configuring a Site-to-Site VP

ay.

Destination network Type

to which

Subnet mask

Select the subnet masks fo

the destination networks and subnet masks from the VPN

site’s s

ateway

site to use if the primary VPN site fails.

up to three destination network addresses at the VPN site

u want to connect.

r the destination network addresses.

te:

Obtain

ystem administrator.

pe the name of the VPN

Backup G

Chapter 12: Working With VPNs

321

Содержание CP310 - DFL - Security Appliance






































































































































































































































































































































































































































































































Результаты поиска

Содержание CP310 - DFL - Security Appliance

Отзывы:

D-Link CP310 - DFL - Security Appliance, Руководство пользователя, Страница: 337 / 485

Результаты поиска

Содержание CP310 - DFL - Security Appliance

Отзывы: