D-Link CP310 - DFL - Security Appliance Скачать руководство пользователя страница 288

Страница: 288 / 485

Configuring VStream Antivirus

Table 60: VStream Rule Fields

In this field… Do this…

Any Serv

ny service.

ice

Click this option to specify that the rule should apply to a

Standard

Service

cific tandard

op-d wn list.

Custo

lds are enabled. You must fill them in.

Proto

ld apply.

ou do not enter a port range, the rule will apply to all ports. If you

enter only one port number, the range will include only that port.

If the

connection

source is

Select the source of the connections you want to allow/block.

To specify an IP address, select

Specified IP

and type the desired IP address

in the filed provided.

To specify an IP address range, select

Specified Range

and type the desired

IP address range in the fields provided.

Click this option to specify that the rule should apply to a spe

service.

You must then select the desired service from the dr

m Service

Click this option to specify that the rule should apply to a specific non-

standard service.

The

Protocol

and

Port Range

fie

col

Select the protocol (TCP, UDP, or ANY) for which the rule shou

Ports

To specify the port range to which the rule applies, type the start port

number in the left text box, and the end port number in the right text box.

Note:

If y

272

D-Link NetDefend firewall User Guide

Содержание CP310 - DFL - Security Appliance






































































































































































































































































































































































































































































































Результаты поиска

Содержание CP310 - DFL - Security Appliance

Отзывы:

D-Link CP310 - DFL - Security Appliance, Руководство пользователя, Страница: 288 / 485

Результаты поиска

Содержание CP310 - DFL - Security Appliance

Отзывы: