d.gen Artrix H8, Руководство оператора

Страница: 64 / 77

TITLE OPERATOR MANUAL PAGE
PRINTERS ARTRIX H8 64
VERSION 2017SEP01/1 OUT OF
REVISED BY MUNOZ, ANTONIO support@dgen.com 77
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
Big number of missing nozzles affecting both channels equally.
Perform several cleanings until getting a perfect test pattern.
Make sure the ink tubes are free of air and bubbles.
Keep service hoses always full on ink and free of air and bubbles.
Is the printer’s negative pressure too low?
(Usually a value of -3.50 KPA is used).
Still can see drops on the head even after wiping it?
Missing nozzles affecting one channel.
Perform several cleanings until getting a perfect test pattern.
Make sure the ink tubes are free of air and bubbles.
Keep service hoses always full on ink and free of air and bubbles.
Is the printer’s negative pressure too low?
(Usually a value of -3.50 KPA is used).
Still can see drops on the head even after wiping it?
One row of nozzles is basically gone.
Make sure the gray flat cables are well connected to the head driver board.
Make sure print head is well connected to the head driver board.
Is the head driver board displaying any alert noise/led?
Is that row of nozzles disabled in the JCC?
Swap the head driver board with another one and see if the issue moves to the other
color.