d.gen Artrix H8, Руководство оператора

Страница: 8 / 77

TITLE OPERATOR MANUAL PAGE
PRINTERS ARTRIX H8 8
VERSION 2017SEP01/1 OUT OF
REVISED BY MUNOZ, ANTONIO support@dgen.com 77
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
5
Maintenance cover.
Used when cleaning the printer and switching on the PC control box.
6
Emergency push switch button.
This printer has a total of 4 emergency buttons. 2 more at the back side.
7
Automated capping station.
Moved up/down by a stepping motor. Use this capping station to cap the print heads always when not
printing. Bring down the capping station by pushing the left arrow in the touch panel. Raise the capping
station by pushing the home button in the touch panel.
8
Media width sensor.
Push the media width button in the touch panel to measure the media’s width every time after setting
a different media.
9
Automated wiper unit.
If user executes Auto cleaning, this wiper will work automatically. To increase the wiper’s performance,
remove ink residue on wiper periodically.
10
Flushing stage.
The flushing unit is used to keep the print heads unclogged. Every time the carriage leaves the home
position for printing right to left, the heads flush a very small quantity of ink in order to keep the nozzles
always unclogged.
11
Carriage height adjustment lever.
This lever regulates the carriage height in 3 positions. Low, medium and high. Depending the
thickness of the media. There is a difference of 1 mm between positions.
12
Magnetic LM block and 720dpi encoder strip.
Do not use metal elements near this device. Clean the magnetic rail only with alcohol. The encoder
strip with warm distilled water.
CARRIAGE