16 of 19
The
“Error”
field gives an approximation of the error rate detected on the digital audio input signal. Typically, this value
should always be 0 ppm. This information is generally used for troubleshooting purposes.
3.4.3 Error Message option
This screen displays the error messages of the Motion Controller Interface (MCI) that is an internal part of your system.
This option is generally used for troubleshooting purposes.
Refer to the FAQ section for more details.
3.5 Version sub-menu
The “Version” sub-menu displays the version information for the different components of the Motion Controller.
The
“Soft”
field provides the version of the Motion Controller’s application software.
The
“Firm”
field provides the version of the firmware of the USB controller on the MCI board.
The
“DSP”
field provides the firmware version information of the Digital Signal Processor that is used on the MCI board.
The
“FPGA”
field provides date stamp information on file loaded into the Field Programmable Gate Array used on the
MCI circuit board.
3.6 Error Log sub-menu
The “Error Log” sub-menu displays the error messages recorded on your Motion Controller. It can store up to 99 error
messages. This information is generally used for troubleshooting purposes.
3.7 Serial Number sub-menu
The “Serial Number” sub-menu displays your Motion Controller’s serial number.
3.8 Remote Access sub menu
The “Remote Access” sub-menu displays the different options for the remote access.
The “
Remote Access ID
” field provides the identification number for the remote access of the Motion Controller.
The “
Enable Access
” field allows you to activate or deactivate the remote access.
