7
4.1 Hardware
We recommend carrying out the following steps in the order specified.
1. Carefully unbox your HeMC and remove it from the plastic bag.
2. Please read the online terms and Conditions before breaking the seal on the box containing your cables. Read and keep all
documents contained in the cable box.
3. attach both antennas to the appropriate connectors on the HeMC unit. You don’t need antennas if you plan to use only the wired
connection, but you must use an RJ45 ethernet cable to connect your HeMC to your router.
4. Plug the Usb cable from the KaI-1P into the port at the back of the HeMC (KaI-1P is sold separately).
5. Connect your actuator Control Module (aCM) to your KaI-1P using an RJ45 shielded ethernet cable (RJ45 is sold separately by a
third party).
6. Connect an analog audio source from your home theatre a/V source (output) to the HeMC 1/8 audio-in port (3.5 mm [1/8 in]).
(Cable sold separately.) Can also be connected via an external converter that accepts Coaxial audio, toslink or HDMI connections.
(Please see suggested converters on page 8.)
7. Connect the power cord and aC adaptor. Plug the power cord into an electrical outlet.
8. Power up your new HeMC unit.
4. HeMC setUP
4.2 The HEMC Is Fanless
It is normal for the unit to heat up. allow some space above the unit so the heat may dissipate properly.
