5. Problems solving
25
5.1. Problems solving
Before a new Drill comes to you, it passes a very thorough output check. Due to various circumstances beyond our control, various technical
problems may occur.
Therefore, we have prepared some tips that could help you in case of a problem. Of course, feel free to visit your Drill dealer with any problem.
Drill cannot be started?
1/ Check that the battery is sufficiently charged.
2/ Make sure the tug is plugged in and the starter is in position ON.
3/ Check that all connections are connected and that all cables are in perfect condition.
4 / Has there been a previous reduction in engine power while driving? Did you stop? The engine may be overheated. Proceed in accordance
with point 3.6. in point 8/ of this manual.
Drill stopped while driving?
1/ The battery is discharged. Check the charge level, if discharged, charge it according to the instructions.
2/ Is the tug in correct place?
3/ The motorcycle protection system has been activated. Switch the engine off and on again.
4 / Has there been a previous reduction in engine power while driving? Did you stop? The engine may be overheated. Proceed in accordance
with point 3.6. in point 8/ of this manual.
