2.3
Emergency procedures
Introduction
This section describes how to shut down the Monitor UVis-920 instrument in an emer-
gency situation, and the procedure for restarting the Monitor UVis-920 instrument.
The section also describes the result in the event of power failure.
Emergency shutdown
In an emergency situation, follow the steps below to stop the run:
Step
Action
1
Switch off power to the instrument by switching the
On/off switch on the
rear panel to the
(O) position.
Result:
The run is interrupted immediately.
2
Disconnect the mains power cord.
Power failure
In the event of power failure the run is interrupted immediately.
Restart after power failure
If the power supply to the instrument is interrupted, the instrument automatically
restarts itself and displays the main operating menu. All set values are retained in the
instrument but the instrument starts with the lamp switched off (standby).
2 Safety instructions
2.3 Emergency procedures
16
Monitor UVis-920 Operating Instructions 29055049 AF
