FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
11
3. FME-FR Programmer
This chapter explains the usage of the ‘FME-FR Programmer’ for serial asynchronous programming of the
MB91460 series flash devices.
The ‘FME-FR Programmer’ is a serial asynchronous programming tool for the Cypress FR flash microcontrollers
of the MB91360 and MB91460 series. It uses the internal bootloader functions to set up communication.
The ‘FME-FR Programmer’ can be used for development purposes free-of-charge and is not released for any
mass-production purposes.
Figure 3-1: FME-FR Programmer Icon
There are two ways of programming:
Automatic mode
Manual mode (step-by-step)
3.1
Automatic Mode
The automatic mode is the easiest way of using the programmer software. There are only some user settings
needed on the “Automatic” sheet.
