GALEP-Programmer
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
30
Figure 5-14. Programmer action
Use the functions now enabled on the bottom of the
window to select action:
Program: write loaded mhx/bin-file to MCU
Verify: compare loaded file to Flash contents
Blank: do a blank check
Read: read-out Flash content
Erase: perform a chip erase
After selecting a operation, t
ab ‘Action’ is automatically
activated. Press ‘Start’ button to start operation.
For further information on available settings in software
and jumper settings on starterkits have a look at ‘Options”
‘MB91F467D Options” (or other MCU type) and ‘Device
He
lp’.
5.2.2
Serial Synchronous Programming with GALEP-5 Programmer
Conitec offers an ISP-adapter (210915) for all devices with serial-synchronous burn-in bootloader. This adapter
will be put into the Textool
TM
socket and a 10-pin cable-connector is used for the connection to the
microcontroller.
All MB91460 series starterkits provide a 10pin connector to connect the programmer tool.
Figure 5-15: 10pin connector for serial synchronous programming
