GALEP-Programmer
FR Family MB91460 Series, Flash Programming, Doc. No. 002-05153 Rev. *A
21
Software used together with the GALEP-4 programmer is GALEP32. This software supports all programming
modes available for the adequate device.
Figure 5-2: GALEP32 programmer software
5.1.1
Parallel Programming with GALEP-4 Programmer
The GALEP-4 programmer includes a 40-pin Textool
TM
-socket, for devices with Dual-Inline-Packages (DIP). For
other packages optional adapters are available, e.g.:
Table 5-1: Parallel Programming Adapters
Package
GALEP-Adapter
Remark
QFP208
210881
MB91F465D, MB91F467D
LQPF100
210882
MB91F464A, MB91F465X
LQFP120
210883
MB91F465K
BGA256
210884
MB91F469G
LQFP64
210889
MB91F463N
LQFP144
210890
MB91F465B, MB91F467B
LQFP176
210891
MB91F467R
LQFP144
210892
MB91F465C, MB91F467C
LQFP176
210898
MB91F465P, MB91F467P
LQFP176
210899
MB91F467S
Connect the adapter to the Textool
TM
–socket (take care pin 1 marking), place the MCU in the adapter and close
the adapter’s cover. Start the GALEP32 programmer software and use ‘Load’ command to load a bin or hex file.
Select tab ‘Devices’ and browse to the correct device, e.g. MCU
Cypress
MB91F467D. Choose QFP208
(or correct package) for parallel programming. In the information window below the correct programming adapter
is listed. Use ‘Select Device!’ button to accept current selection.
Figure 5-3: GALEP-4 with adapter 210881
