Software Development
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
42
4.2.6.3 Verify Output
1. Power the FM0+ S6E1C-Series Starter board from CN3 using USB cable, refer to
2. Open the project file in IAR Embedded Workbench or Keil µVision IDE from the following
directory on your PC:
IAR project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo Projects\s6e1c3_sleep_mode\IAR
\s6e1c3_sleep_mode.eww.
Keil project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo Projects\s6e1c3_sleep_mode\ARM
\s6e1c3_sleep_mode.uvprojx.
3. Build the project and download the code into the S6E1C3 device.
4. Run the program.
5. The RGB LED (LED4) will blink 5 times (green color), and then the MCU enters sleep mode.
6. Press the SW2 key to wake up the MCU.
7. The RGB LED (LED4) will glow with green color.
4.2.7 Software Watchdog
4.2.7.1 Project Description
This project is to demonstrate the operation of the S6E1C3 watchdog. The project will
demonstrate the impact of two different situations (with watchdog enabled): when the watchdog
is fed and when the watchdog is not fed.
If the watchdog is enabled, but the watchdog is fed in time, the program will run properly, and the
RGB LED will blink in green.
If the watchdog is enabled, but the watchdog is not fed in time, the chip is reset, and the green
LED will remain on.
4.2.7.2 Hardware Connection
No specific hardware connections are required for this project. All connections are hardwired on
the board.
4.2.7.3 Verify Output
1. Power the FM0+ S6E1C-Series Starter board from CN3 using USB cable, refer to
2. Open the project file in IAR Embedded Workbench or Keil µVision IDE from the following
directory on your PC:
IAR project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo Projects\s6e1c3_st_wdt\IAR
\s6e1c3_st_wdt.eww.
Keil project:
<User_Directory>:
\
FM0+ S6E1C-Series Starter
Kit_Ver01
\Firmware\Demo Projects\s6e1c3_st_wdt\ARM
\s6e1c3_st_wdt.uvprojx.
3. Build the project and download the code into the S6E1C3 device.
Содержание FM0+ S6E1C-Series
Страница 48: ...FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 48 A Appendix A 1 Schematic Figure A 1 MCU...
Страница 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Страница 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Страница 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
