Kit Operation
CY4502 EZ-
PD™ CCG2 Development Kit Guide, Doc. No. 001-96601 Rev. *G
17
There are two advantages of using this topology:
1. Saves one wire (VCONN) running through the cable
2. Allows both plug ends to be identical, which saves on inventory costs
For more details on this application, refer to
AN95615 - Designing USB 3.1 Type-C Cables Using EZ-
3.5 CCG2 Two-Chip EMCA Application (Both Chips Powered)
The CY4502 board can operate in the two-chip EMCA application, with both CCG2 controllers powered, as shown in
. Follow these steps to configure the board for this mode (depicted in
):
1. Short pins 1 and 2 of jumper J6.
2. Short pins 1 and 2 of jumper J7.
3. Short pins 1 and 2 of jumpers J8 and J13.
4. Short pins 1 and 2 of jumper J5.
to test the CY4502 board.
Figure 3-8. CCG2 Two-Chip EMCA Application (Both Chips Powered) Jumper Settings
LED2
LED1
J6 - Closed
J8 - Closed
J7
– Short 1-2
J5 - Closed
J13 - Closed
