Cypress CY3274, Руководство пользователя

Страница: 35 / 87

CY3274 Cypress High Voltage Programmable PLC Development Kit Guide, Doc. # 001-53598 Rev. *G 35
Kit Operation and PLC Control Panel GUI
Get Configuration
When this button is clicked, the remote node configuration is retrieved and shown in the correspond-
ing fields. The correct address of the remote node must be set for successful retrieval.
The field descriptions are the same as those for the local node but apply specifically to the remote
node.
Set Configuration
This option sets the updated changes on to the remote PLC node. Only the logical address, group
address, transmitter state, band in use state, and the extended address state are altered by the local
node. The changes are only applied to the remote node if its Lock Configuration setting is disabled.
Reset Remote Node
Similar to the local node, this button allows the user to load the default configurations to the remote
PLC node. Resetting the PLC node to default state preserves the logical address, group address,
PLC Mode, and Threshold register. All other values are reset. The remote node resets only if its Lock
Configuration setting is disabled.
3.3.3.4 Messaging Tab
The characteristics of the data packet or message are configured using this tab.
Figure 3-12. Messaging Tab