CYP CSC-6030HB, Руководство по эксплуатации

Страница: 9 / 80

4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
HDMI OUT
BYPASS
USB-C CAT 1 CAT 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 VGA 1 VGA 2 MIC
AMP.
L/R
VOL.
MIX
MENU ENTER
WUXGA
1080P
- +
VIDEO IN AUDIO OUT SELECT
1 2 3 4 5 6 7 8 9 10
1
POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2 MENU Button: Press to enter the OSD menu, or to back out from
menu items.
3
MINUS (-) Button: Press to move down or adjust selections within
OSD menus.
4
PLUS (+) Button: Press to move up or adjust selections within OSD
menus.
Note: Pressing the “+” button when not in a menu will toggle the
video freeze feature.
5
ENTER Button: Press to confirm a selection within the OSD or to go
deeper into a menu item.
Note: Pressing “ENTER” and “+” together will reset the output
resolution to WUXGA (1920×1200@60Hz). Pressing “ENTER” and “-”
together will reset the output resolution to 1080p@60Hz.
6
HDMI OUT BYPASS Button & LED: Press this button to enable or
disable the HDMI video Bypass function. When bypass is enabled,
the LED will illuminate.
7
VIDEO IN Buttons & LEDs: Press any of these buttons to switch
immediately to the corresponding input. An LED will illuminate to
indicate which source is currently selected.
8
AUDIO OUT SELECT Button & LEDs: Press this button to select the
microphone mix mode of the unit. The LED will illuminate to
indicate the current mix mode. When both LEDs are off, the mixer
is disabled.
Note: Activating Mixer On mode, or MIC Only mode will
automatically disable HDMI Out Bypass mode.