CYP CSC-6030HB, Руководство по эксплуатации

Страница: 32 / 80

27
3) Additional Settings:
■ HDMI Out Bypass: Enable or disable the video output bypass
mode. When bypass is enabled, HDR video and bitstream
audio can be supported, however it will disable the unit’s
scaling and video adjustment functions.
Note: This setting affects both the HDMI and HDBaseT outputs.
This setting does not enable audio bypass.
■ Output Resolution: Selects the output resolution to use when
HDMI bypass is disabled. Selecting a “Native” resolution option
will make the unit automatically select an output resolution
based on the detected EDID of the connected display.
Note: Not active when HDMI bypass mode is enabled.
■ Output Aspect: Selects the aspect ratio to use when outputting
the source. “Full” stretches the source to fill the output
resolution, regardless of the original aspect ratio, while “Best
Fit” will always attempt to retain the original source’s correct
aspect ratio by adding black bars if necessary. “Follow In”
centers the source on the screen, without any scaling (1:1 pixel
reproduction).
Note: Not active when HDMI bypass mode is enabled.
■ Output Blank: Enable or disable blanking the video output.
Note: Not available when HDMI bypass mode is enabled.
■ Output Freeze: Enable or disable freezing the video output.
Note: Not available when HDMI bypass mode is enabled.
■ Output Auto Sync Off: Sets the amount of time to continue
outputting sync with the free run color if there is no live source
and no operations have been executed on the unit. Setting this
to “OFF” forces the unit to always output sync.
■ Output Auto Route: Enable or disable automatically switching
to any newly detected source.