CYP CSC-6030HB, Руководство по эксплуатации

Страница: 42 / 80

37
3) Control Route Setting: These settings control the unit’s 2 relay ports
as well as defining the HDBaseT routing to use for the RS-232 and IR
ports on the unit.
■ Relay 1 & 2: Manually open or close Relay 1 and Relay 2.
Selecting “ON” closes the relay, selecting “OFF” opens it.
■ RS232: Use the dropdown to select which HDBaseT port the
local RS-232 port should route across. Available choices are:
HDBT Out, HDBT In1, and HDBT In2.
■ IR: Use the dropdown to select which HDBaseT port the local
IR ports should route across. Available choices are: HDBT Out,
HDBT In1, and HDBT In2.
4) Reset to Default: Press the “ALL Reset” button to reset the unit to
its factory default state. After the reset is complete, the unit will
reboot automatically.
5) Firmware Upgrade: To update the unit’s firmware, click the “Choose
File” button to open the file selection window and then select the
firmware update file (*.bin format) located on your local PC. After
selecting the file, click the “Upgrade” button to begin the firmware
update process. After the upgrade is complete, the unit will reboot
automatically.