CYP CSC-6030HB, Руководство по эксплуатации

Страница: 11 / 80

6
6
RELAY 1~2 2-pin Terminal Blocks: Connect to devices that can
be powered and controlled via a DC 0~24V/5A relay connection
such as a curtain, projection screen, or lights.
7
IR IN Port: Connect to an IR Extender to receive local IR control
signals and extend them to devices connected to the other end
of the HDBaseT connection. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
IR OUT Port: Connect to an IR Blaster to transmit IR signals from the
other end of the HDBaseT connection to devices within direct line-
of-sight of the IR Blaster.
Note: IR can only be routed across a single HDBaseT connection
at a time. The HDBaseT connection to use is defined within the
WebGUI or OSD menu.
8
RS-232 1 4-pin Terminal Block 1 (Top): Connect directly to a PC,
laptop, or other serial control device with a 3-pin adapter cable to
send RS-232 commands to control the unit.
Note: The 24 volt pins are included to provide power to a
dedicated external control product and should NOT be used when
connecting a standard RS-232 device.
RS-232 2 4-pin Terminal Block (Bottom): Connect to a PC, laptop,
or serial controllable device with a 3-pin adapter cable for the
extension of RS-232 signals between this unit and the designated
HDBaseT connection.
Note: RS-232 can only be routed across a single HDBaseT
connection at a time. The HDBaseT connection to use is defined
within the WebGUI or OSD menu.
9
USB-C INPUT Port: Connect to USB Type-C video source equipment
such as a PC or laptop.
Note: Not all devices with USB Type-C ports can support video
output. Please verify that the device supports video output from
the USB Type-C port before connecting it.
10
CAT5e/6/7 INPUT 1~2 Ports: Connect to compatible HDBaseT
transmitters with a single Cat.5e/6/7 cable for reception of all data
signals. PoH will also be supplied to connected compatible PD
transmitters.
11 HDMI INPUT 1~4 Ports: Connect to HDMI source equipment such as
media players, game consoles, or set-top boxes. DVI sources are
supported with the use of an HDMI to DVI adapter.