CYP CSC-6030HB, Руководство по эксплуатации

Страница: 27 / 80

22
EDID
2ND LEVEL
3RD LEVEL
EDID On VGA 2 [Same options as for VGA 1]
1) EDID Selection: Select the EDID to use with each input.
Note: In most cases, assigning a new EDID to an input will cause
the affected input to briefly blink out while the source adapts to
the new information.
SYSTEM
2ND LEVEL
3RD LEVEL
Relay 1 OFF
On
Relay 2 OFF
On
RS-232 HDBT OUT
HDBT In 1
HDBT In 2
IR HDBT OUT
HDBT In 1
HDBT In 2
1) Relay 1~2: Manually open or close Relay 1 and Relay 2. Selecting
“ON” closes the relay, selecting “OFF” opens it.
2) RS-232: Set which HDBaseT port the local RS-232 port should route
across. Available choices are: HDBT Out, HDBT In1, and HDBT In2.
3) IR: Set which HDBaseT port the local IR ports should route across.
Available choices are: HDBT Out, HDBT In1, and HDBT In2.