CYP CSC-6030HB, Руководство по эксплуатации

Страница: 18 / 80

13
1) HDMI Out Bypass: Enable or disable the video output bypass
mode. When bypass is enabled, HDR video and bitstream audio
can be supported, however it will disable the unit’s scaling and
video adjustment functions.
Note: This setting affects both the HDMI and HDBaseT outputs. This
setting does not enable audio bypass.
2) Output Route: Select the video input to route to both outputs.
3) Output Resolution: Select the output resolution to use when HDMI
bypass is disabled. Selecting a “Native” resolution option will make
the unit automatically select an output resolution based on the
detected EDID of the connected display.
Note: Not active when HDMI bypass mode is enabled.
4) Aspect: Select the aspect ratio to use when outputting the source.
“Full” stretches the source to fill the output resolution, regardless
of the original aspect ratio, while “Best Fit” will always attempt to
retain the original source’s correct aspect ratio by adding black
bars if necessary. “Follow In” centers the source on the screen,
without any scaling (1:1 pixel reproduction).
Note: Not active when HDMI bypass mode is enabled.
5) Blank: Enable or disable blanking the video output.
Note: Not available when HDMI bypass mode is enabled.
6) Freeze: Enable or disable freezing the video output.
Note: Not available when HDMI bypass mode is enabled.
7) Auto Setting:
■ Auto Sync Off: Sets the amount of time to continue outputting
sync with the free run color if there is no live source and no
operations have been executed on the unit. Setting this to “OFF”
forces the unit to always output sync.
■ Auto Input: Enable or disable automatically switching to any
newly detected source.
8) HDCP Setting: Provides control over the HDCP behavior of each
input.
Note: The VGA inputs are not listed as they cannot support HDCP.